Coating Thickness Testing Services
A coating that’s too thin fails to protect. A coating that’s too thick drives up your costs. Either way, you’re not meeting spec. Verichek is ISO 17025 accredited for coating thickness testing using X-ray fluorescence (XRF) — fast, non-destructive measurement in our lab or at your facility, with results your quality records can stand behind.
Verichek is ISO 17025 accredited for Coating Thickness Testing under ISO/IEC 17025:2017.
We Test To
Coating thickness testing serves both quality and cost control functions. Here’s where it delivers the most value.
Control Coating Costs
Coatings applied thicker than specified consume excess material with no quality benefit. Measurement ensures you’re hitting spec — not over-coating and wasting money.
Verify Functional Performance
Corrosion resistance, hardness, solderability, and friction reduction all depend on coating thickness being within spec. Testing confirms the coating will perform as intended.
Meet Quality Control Requirements
Customers and regulators often require documented coating thickness data. ISO accredited results give you the traceability your quality system and audit trail need.
Our Coating Thickness Testing Services
We use X-ray fluorescence (XRF) — the widely accepted, preferred method for coating thickness measurement — on the Hitachi X-MET8000 handheld analyzer.
XRF Coating Thickness Measurement
X-ray fluorescence directs X-rays at the coated surface and analyzes the fluorescent X-rays emitted — providing elemental and thickness data without damaging the material. Results in seconds.
In-House Lab Testing
Smaller sample volumes (typically up to 100 pieces depending on size and weight) are processed in our controlled lab environment with fast turnaround and documented results.
On-Site Testing
For larger volumes, oversized parts, or installed components, our technician brings the X-MET8000 to your facility. Testing is fast and non-destructive with no production disruption.
In-House & On-Site Testing Options
We tailor coating thickness testing to your project. The right option depends on the number of pieces, their size and weight, and whether they can be shipped to our lab.
On-Site Coating Thickness Testing
For customers with larger volumes (typically 100+ pieces), parts that are cost-prohibitive to ship, or components already installed. A Verichek technician brings the Hitachi X-MET8000 to your location — fast, non-destructive, and with no production disruption.
In-House Coating Thickness Testing
For customers with smaller sample quantities — up to approximately 100 pieces depending on size and weight. Our lab provides a controlled measurement environment and fast, accurate turnaround that meets your schedule.
Equipment We Use
All coating thickness measurement is performed using the Hitachi X-MET8000 handheld XRF analyzer — fast, non-destructive, and calibrated for coating work.
Hitachi X-MET8000 Handheld XRF
Our primary coating thickness instrument. Delivers results in seconds, calibrates in as little as 30 seconds, and does not damage the material being tested. Portable for on-site use.
ISO 17025 Accredited Process & Certificate
Every measurement is performed under our ISO 17025 accredited process. You receive documented results and a certificate of accreditation — contact us for a copy. This is what separates a traceable, audit-ready result from a number on a printout.
Frequently Asked Questions
What types of coatings can you measure?
We measure a wide range of metallic coatings — including zinc, nickel, chrome, gold, silver, and other plated or applied coatings. Contact us with your specific coating and substrate to confirm coverage before submitting samples.
Is the measurement destructive?
No. XRF measurement is completely non-destructive. The material being tested is not damaged or altered in any way during measurement.
When should I choose in-house vs. on-site testing?
In-house testing is ideal for smaller batches that can be shipped — up to approximately 100 pieces depending on size and weight. On-site testing is better when you have high volumes, oversized parts, or components that are already installed and cannot be removed.
Are you ISO accredited for coating thickness testing?
Yes. Verichek is ISO 17025 accredited for coating thickness testing. Contact us for a copy of our certification.
Our Metal Testing Services
PMI Testing
Confirm your metal is exactly what it’s supposed to be — before it goes into service. ISO 17025 accredited OES, XRF, and LIBS testing, in-house or on-site.
Hardness Testing
Verify your metal will perform under load with ISO accredited Rockwell, Brinell, Vickers, and Leeb testing — in our lab or at your facility.
Retained Austenite Measurement
ISO accredited XRD measurement for heat-treated steel parts. ASTM E975-14g compliant results within 24 hours.
Not Sure Which Spectrometer Is Right for You?
Our technical sales team has decades of experience matching OES instruments to specific applications. Let us help you find the perfect spectrometer for your needs.
ISO/IEC 17025 Accredited Precision
Our ANAB accreditation is your guarantee of technical competence. Backed by 30+ years of business excellence and 150+ years of combined expertise.
